InfiNet Wireless R5000 Technical User Manual
Copyright © 2004-2010 by InfiNet Wireless
61
browsers may spontaneously put random data into them so that after
the configuration is applied the password will be unknown to the user.
Radio Settings
This section allows viewing/setting the following radio parameters:
• Interface –available radio interface
• Type – network type of the node (Master, Slave)
• Channel Width - operating channel bandwidth of the radio in MHz. Must
be equal at both sides of the link
• DFS – allows starting DFS (Dynamic Frequency Selection) service or DFS
without Radar Detection
• Frequency - central operating frequency in MHz. Must be equal at both
sides of the link.
• Frequency range list - list of frequencies allowed for choosing by DFS
service
• TX Power - output power of the radio in dBm. “Auto” field enables ATPC
function (recommended)
• Tx Bitrate - fixed operating bitrate (if numerical value chosen) or auto
bitrate (Automatic Modulation Control) if "Auto" is chosen. “Autobitrate”
is recommended
To Next Page
Loading...