InFocus IN3136a User Manual

— 10 —
Turning the projector on and off
1.
Connect the power cord to the
projector. Connect the other end to
a wall outlet.
The POWER LED on the
projector light.
2.
Turn on the connected devices.
3.
Ensure the POWER LED is not
flashing. Then press the POWER
button to turn on the projector.
The projector splash screen displays
and connected devices are
detected.
See Setting an Access Password
(Security Lock) on page 12 if the
security lock is enabled.
4.
If more than one input device is
connected, press the SOURCE
button and use ▲▼ to scroll among
the devices.
(Component is supported using a
RGB to COMPONENT ADAPTER.)
 HDMI1 /MHL: High-Definition Multimedia Interface/
Mobile High-Definition Link
 HDMI2: High-Definition Multimedia Interface
 VGA1 / VGA2: Analog RGB1 / RGB2
 S-Video: Super video (Y/C separated)
 Composite Video: Traditional composite video

InFocus IN3136a Specifications

General

Noise Level	37 decibels
White Brightness	4500 lumens
Resolution	768p
Native Resolution	1280 x 800
Contrast Ratio	8000:1
Aspect Ratio	16:10
Throw Ratio Range	1.45 - 2.17
Keystone Effect	yes
3D	yes
Minimum Screen Size	25.7 inches
Maximum Screen Size	320.9 inches
Focus Adjustment	manual
Optical Zoom	1.5x
Minimum Distance	3.94 feet
Maximum Distance	32.8 feet
HDMI Ports	2
USB Ports	1
Video Input	composite video, hdmi, s-video, vga
Inputs	3.5mm audio, composite video, hdmi, rca, s-video, vga
Built In Speakers	yes
Speakers Output	10 watts
Remote Control	yes
OS Compatibility	mac, windows

Weight and Dimensions

Depth	10.3 inches
Height	4.8 inches
Width	11.2 inches
Net Weight	6.94 pounds