InFocus IN3136a - Settings 2 Menu Options; Settings 2 Menu Overview

— 30 —
Settings 2 Menu
Press the MENU button to open the OSD menu. Press the ◄► buttons to move to the Settings 2
menu. Press the ▲▼ buttons to move up and down in the Settings 2 menu.
ITEM
DESCRIPTION
Auto Source
Press the ◄► buttons to enter and enable or disable automatic source detection.
No Signal Power
Off (min.)
Press the ◄► buttons to enter and enable or disable automatic shutdown of lamp
when no signal is detected.
Auto Power On
Press the ◄► buttons to enter and enable or disable automatic power On when AC
power is supplied.
Lamp Mode
Press the ◄► buttons to enter and select the lamp mode for higher brightness, or
lower brightness if you wish to save lamp life.
Reset All
Press (Enter) or ► to reset all settings to default values.
Status
Press (Enter) or ► to enter the Status menu. See page 31 for more information on
Status.
Advanced 1
Press (Enter) or ► to enter the Advanced 1 menu. See Advanced 1 Features on
page 32.
Advanced 2
Press (Enter) or ► to enter the Advanced 2 menu. See Advanced 2 Features on
page 41.
Note:
“Dynamic ECO”: Press the Blank button to activate the Dynamic ECO feature, which will dim the lamp
30% when the image is black.