InFocus X2 Service Manual

X2 Service Manual 45
Troubleshooting
You use the Troubleshooting section to diagnose problems with the projector. In this section, you will find
troubleshooting flowcharts for a variety of symptoms. Each flowchart leads you through a series of steps
that will ultimately result in a solution. The solutions begin with the most simple and progress to the most
complex.
What do you want help solving?
Power problems, including lamp issues, partial power up, shutdown and no power (page 46)
Image problems, including no image, bad color, dim image and other picture distortions (page
53)
Keypad problems (page 57)
Remote problems (page 58
Audio problems (page 59)
Check Internal Voltages and Signals
In addition to the troubleshooting flowcharts, you can also check internal voltages and signals to diagnose
a defective part.

InFocus X2 Specifications

General

Number of colors	16.78 million colors
Native aspect ratio	-
Projection distance	- m
Vertical scan range	50 - 85 Hz
Projection technology	DLP
Contrast ratio (typical)	2000:1
Screen size compatibility	- \
Projector native resolution	SVGA (800x600)
Focal length range	- mm
Number of built-in speakers	1
Lamp type	SHP
Lamp power	200 W
Service life of light source	3000 h
Full HD	No
Analog signal format system	NTSC, PAL
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	- dB
Placement	Desktop
Product type	Standard throw projector
Product color	Gray
Power consumption (standby)	- W
Harmonized System (HS) code	85286200

Weight and Dimensions

Weight	3100 g