Configuration
0120-07390-0101 17
3. Remove the card if there is one.
4. Insert the new card. The card slides in between the metal bar and the plastic case. The golden metal
electrical contacts on the card should face the terminal. The cut-out corner on the card is positioned
at the lower right.
5. Press the case back to its position and bring the metal bar down to lock the case.
6. Slide the SIM card slot cover back to its place, closing the slot.
7. Reinsert the battery. Insert the two small teeth that come out from the lower part of the battery into
the two notches near the lower part of the terminal.
8. Press the upper part of the battery against the terminal until it clicks in its place. Ensure that the
battery and the terminal are firmly attached.
Keyboard
I7910 Keyboard
Data Entry Keys
Data Entry Key Description
[1 QZ]
Number 1, space, and letters Q, Z.
[2 ABC]
Number 2 and letters A, B, C.
[3 DEF]
Number 3 and letters D, E, F.
[4 GHI]
Number 4 and letters G, H, I.
[5 JKL]
Number 5 and letters J, K, L.
[6 MNO]
Number 6 and letters M, N, O.
[7 PRS]
Number 7 and letters P, R, S.
[8 TUV]
Number 8 and letters T, U, V.
[9 WXY]
Number 9 and letters W, X, Y.
[0 * # , . ]
Number 0 and the special characters “asterisk”, “pound sign”, “comma” and “period”.
To Next Page
Loading...
Need help?
General
