Ingenico I7910 User Manual

I7910 Payment – User Manual
44 0120-07390-0101
Credit Sale With Wireless Fee
a
SALE
PRE-AUTH
PRE-AUTH COMP
1. At the idle screen, swipe the credit card if the default transaction is sale (see page 23
and 35), otherwise press [OK] to select SALE.
2. Enter the password (configurable; see page 25).
3. Perform the credit card security (swiped cards, configurable; see page 37).
4. Enter the clerk ID – 123 in the example (configurable; see page 22).
SALE
DEBIT CREDIT
5. This screen appears if both card types are configured (see page 23) and if you did not
swipe the card at step 1. Select [CREDIT].
SALE
AMOUNT
$10.00
6. Enter the sale amount ($10.00 in the example).
SALE
SWIPE CARD
7. If you have not done it before, swipe the card or enter the number manually (see page
37) and perform the credit card security (swiped cards, configurable; see page 37).
PRESS ENTER AND
PASS TERMINAL
TO CUSTOMER
8. Press [OK] and pass the terminal to the customer.
Customer screens are displayed if tip is configured (see page 22).
ACCEPT WIRELESS
FEE $3.00?
YES NO
9. The customer presses [OK] to confirm the wireless fee.
SALE
$10.00
OK?
10. The customer presses [OK] to confirm the transaction amount.
SALE
TOT $13.00
OK?
11. The customer confirms the total amount which includes the wireless fee.
PRESS ENTER AND
PASS TERMINAL
TO MERCHANT
12. The customer presses [OK] and passes the terminal back to you.
13. The terminal communicates with the host and displays SENDING, RECEIVING and
PROCESSING.
TRANS APPROVED
1234567
$13.00
14. The terminal displays the response (see page 38) and prints the receipt (see above).
PRINT
NEXT COPY – OK?
15. Press [OK] after detaching the receipt.
The terminal displays PRINTING while it prints the next copies.
Detach them and press [OK].
The terminal returns to the idle screen.

Ingenico I7910 Specifications

General

Brand	Ingenico
Model	I7910
Category	Payment Terminal
Language	English