Ingenico I7910 - Terminal Configuration List

Configuration
0120-07390-0101 31
Terminal Configuration List
a
SALE
PRE-AUTH
PRE-AUTH COMP
1. At the idle screen, press [ADMIN].
ADMIN - SELECT
REPORTS OTHER
2. Select [REPORTS].
a
HELP LIST
TERM TOTALS
HOST TOTALS
3. Use [ ] to highlight TERM CNFG LIST (terminal configuration list), then press [OK].
4. Enter the password (configurable; see page 25).
5. The terminal displays PRINTING while printing the report (see sample below), then
returns to the idle screen.
Terminal Configuration List
CONFIGURATION PARAMETERS
------------------------
BY-THE-LAKE COTTAGES
1001, CLEARWATER RD
HUNTERSTOWN, ONTARIO
CANADA, A1A 2B2
I7910
S/W VERSION
07390-0508
HOST INITIALZATION PARMS
TERM ID
ABCD1234
MERC
1234ABCD
INIT #
TERM # ABCD12345678
TERMINAL CONFIGURATION
TIP ENTRY
YES
CASHBACK
YES
CASHBACK LIM
20.00
CLERK ID
NO
POWER-OFF TIME
2
CRDT CARD CHECK
4 DGTS
TAKE IMPRINT
YES
TERMINAL DATE
20020225
TERMINAL TIME
1132
APPLICATION TYPE
DB/CR
DEFAULT TRAN SALE
MIN TO SURCH
0.00
MAX TO SURCH 0.00
MANAGER PSW CTRL
DEFA
TRAINING MODE
NO
BACKLIGHT ON
ENTER BACKL INTERV
30
SURCH ON SALE
0.75
SURCH CASHBACK 0.05
CONTRAST LEVEL 10
WIRELESS FEE 0.00
HEARTBEAT INTERVAL 8
PRINTER CONFIGURATION
Merchant name and address
Terminal ID
Merchant ID
YES if tip entry is configured or NO otherwise
YES if cashback is configured or NO otherwise
The maximum amount customers can withdraw using cashback
YES if the clerk ID feature is configured or NO otherwise
Number of minutes before the terminal turns itself off
One of these credit card security options:
ECHO – displays the credit card number
4 DGTS – prompts for the last four digits
NO CHK – no checking
YES if the “take imprint” warning is configured for manually entered
credit cards.
NO if it is not configured
The current terminal date (YYYYMMDD) and time (HHMM)
DB/CR if the terminal accepts both debit and credit cards, CREDIT if
only credit is accepted, or DEBIT if only debit is accepted.
DEFA if only the default transactions and functions prompt for the
manager password or
ALL if the password is required for all
YES if the terminal is in training mode or NO if the terminal is in
production mode
Seconds of inactivity after which the terminal turns off the backlight
Indicates the configured amount for the surcharge. If surcharge is
not configured for any option – sale or cashback –, then this line is
not printed.
ON if the printer is configured or OFF if no receipts or reports are
printed
Shows the contents of each of the footer lines
GST number
Number of receipt copies printed during a transaction
YES if the tip line is printed for pre-authorizations or NO otherwise
YES if pre-authorization completion receipts are printed or NO
otherwise
YES if void receipts are printed or NO otherwise
YES if forced post receipts are printed or NO otherwise
YES if declined transaction receipts are printed or NO otherwise
The time period (seconds) the terminal takes to start printing the
next receipt copy
Service code
User name