Business Functions
0120-07390-0101 81
Close Batch
This option settles the current batch with the host usually at the end of a business day.
a
SALE
PRE-AUTH
PRE-AUTH COMP
1. At the idle screen, press [ADMIN].
ADMIN - SELECT
REPORTS OTHER
2. Select [REPORTS].
a
HELP LIST
TERM TOTALS
HOST TOTALS
3. Use [ ] to highlight CLOSE BATCH, then press [OK].
4. Enter the password (configurable; see page 25).
CLOSE BATCH
YES NO
5. Select one of the following options:
[YES] – to close the batch with the host. The terminal communicates with the host and
displays SENDING, RECEIVING and PROCESSING.
[NO] – not to close the batch (the close batch status report is printed either way).
6. The terminal prints the close batch status report (see below) whether or not the batch is
closed. Press [CAN/ANN] after printing to return to the idle screen.
Closed Batch Status Report
CLOSE BATCH STATUS
------------------------
NET TOT
$2.00
SETTLD
$2.00
BATCH 001
CLOSED
BATCH 001
NOT CLOSED
------------------------
END OF REPORT
2002/02/25 11:32
------------------------
This line printed if batch is successfully closed.
This line printed if batch is not successfully closed.
Batch number
This line is returned from the Emergis host and is printed as
received.
This line contains the terminal totals.
Date and time the report was printed (YYYY/MM/DD HH:MM)
To Next Page
Loading...
