Ingenico I7910 - Page 26

Configuration
0120-07390-0101 29
FOOTER LINE 2
BIG SALE DAY
10. Enter the new footer line 2 (BIG SALE DAY in the example).
CHANGE LINE 3
REAL BARGAINS
YES NO
11. Select [YES] to erase the current footer line 3 (REAL BARGAINS in the example) and
enter a new one (next step: 12). Select [NO] if no change is needed (next step: 13).
FOOTER LINE 3
SP
ECIALS EVERY DAY
12. Enter the new footer line 3 (SPECIALS EVERY DAY in the example).
CHANGE GST #
ABCD1234
YES NO
13. Select [YES] to erase the current GST number (next step: 14). Select [NO] if no change
is needed (next step: 15).
The terminal displays the current value – ABCD1234.
ENTER GST #
ABCD1234
14. Enter the new GST number (ABCD1234 in the example) or press [OK] without entering
anything if you want to erase an existing number. See Data Entry Keys (page 17) on
how to type in letters.
NUMBER OF COPIES
2
15. Enter the number of receipt copies to be printed during a financial transaction (2 in the
example). You can enter a value from 1 to 3.
PRE-AUTH RECEIPT
WITH TIP? YES
YES NO
16. Select [YES] to have the tip and total lines printed on pre-authorization receipts or [NO]
if tip and total lines are not required.
CHANGE PRINT
RECEIPTS?
YES NO
17. Select [YES] to change the print option for the following transactions (next step: 18).
Select [NO] to keep the current print settings (next step: 23).
PRINT COMPLETE
TRANS? YES
YES NO
18. Select [YES] if you want to print pre-authorization completion transactions or [NO] if no
receipt is required.
PRINT VOID
TRANS? YES
YES NO
19. Select [YES] if you want to print credit void transactions or [NO] if no receipt is required.
PRINT FORCED
POST TRANS? YES
YES NO
20. This prompt is displayed if forced transactions are supported. Select [YES] if you want
to print credit forced post transactions or [NO] if no receipt is required.
PRINT DECLINED
TRANS? YES
YES NO
21. Select [YES] if you want to print credit declined transactions or [NO] if no receipt is
required.
CHANGE PRINT
INTERVAL
10
22. Enter the number of seconds (from 0 to 20) that the terminal waits to print the next
receipt copy – the printing pause (10 seconds in the example). This is the time you have
to detach the receipt:
If you enter zero, the terminal waits until you press [OK] before printing;
If you enter a number of seconds from 1 to 20, the terminal prints the next copy
when you press [OK] or when the number of seconds has passed.
23. The “admin – other” menu is displayed. Press [CAN/ANN] to return to the idle screen.