InHand CR202 - Page 22

17
Default route
Enable default route
Enable
MAC Address
MAC Address of the device
Device’s MAC
address
MTU
Max. transmission unit, default/manual
settings
default (1500)
Table 3-2-2-3 ADSL Dialing (PPPoE) Parameters of WAN
WAN - ADSL Dialing (PPPoE)
Function description: Set ADSL dialing parameters.
Parameters
Description
Default
Shared connection
Enable—Local device connected to
Router can access to the Internet via
Router.
Disable—Local device connected to
Router cannot access to the Internet via
Router.
Enable
Default route
Enable default route
Enable
MAC Address
MAC Address of the device
Device’s MAC
address
MTU
Max. transmission unit, default/manual
settings
default (1492)
WAN - ADSL Dialing (PPPoE)
Username
Set name of dialing user
N/A
Password
Set dialing password
N/A
Static IP
Click to enable and configure static IP
Disable
Connection Mode
Set dialing connection method (always
online, dial on demand, manual dialing)
Always online
Parameters of Advanced Options
Service Name
Set service name
N/A
TX Queue Length
Set length of transmit queue.
3
Enable IP header
compression
Click to enable IP header compression
Disable
Use Peer DNS
Click to enable use peer DNS
Enable
Link detection interval
Set link detection interval
55 s
Link detection Max. Retries
Set link detection max. retries
10
Debug
Click to enable debug mode
Disable
Expert Option
Set expert options
N/A
ICMP Detection Server
Set ICMP detection server, blank means
disable ICMP detection feature
N/A
ICMP Detection Interval
Set ICMP Detection Interval
30 s