InHand CR202 - Page 47

42
Enter in super user view:
disable
Return to ordinary user view.
2. 3 End and !
[Command] End or !
[Function] Exit the current view and return to the last view.
[View] Configure view.
[Parameter] No
[Example]
Enter in configured view:
end
Return to super user view.
2. 4 Exit
[Command] Exit
[Function] Exit the current view and return to the last view (exit console in case that it is ordinary
user)
[View] All views
[Parameter] No
[Example]
 Enter in configured view:
exit
Return to super user view.
 enter exit in ordinary user view:
exit
Exit console.
3 Check system state command
3. 1 Show version
[Command] Show version
[Function] Display the type and version of software of router
[View] All views
[Parameter] No
[Example]
Enter:
show version
Display the following information:
Type : display the current factory type of equipment
Serial number : display the current factory serial number of equipment
Description : www.inhand.com.cn
Current version : display the current version of equipment