InHand CR202 - Page 48

43
Current version of Bootloader: display the current version of equipment
3. 2 Show system
[Command] Show system
[Function] Display the information of router system
[View] All views
[Parameter] No
[Example]
Enter:
show system
Display the following information:
Example: 00:00:38 up 0 min, load average: 0.00, 0.00, 0.00
3. 3 show clock
[Command] Show clock
[Function] Display the system time of router
[View] All views
[Parameter] No
[Example]
Enter:
show clock
Display the following information:
For example Sat Jan 1 00:01:28 UTC 2000
3. 4 Show modem
[Command] Show modem
[Function] Display the MODEM state of router
[View] All views
[Parameter] No
[Example]
Enter:
show modem
Display the following information:
Modem type
state
manufacturer
Product name
signal level
register state
IMSI number
Network Type
3. 5 Show log