Inovance EtherCAT MD800 - General Data; Purpose of this Document

3
INOVANCE TECHNOLOGY EUROPE GmbH
MD800 EtherCAT Starting Guide_EN_v1.1_20211109.docx
1 GENERAL DATA
Date: 09.11.2021
Hardware: MD800, SI-ECAT card
Software: InoDriverShop for AC drives 3.6.1.16
Info: MD800 EtherCAT communication procedure
2 PURPOSE OF THIS DOCUMENT
The purpose of this document is to facilitate the commissioning of EtherCAT communications on the MD800
drives. To perform this procedure, an MD800 and an optional SI-ECAT communications card are required.