Inovance EtherCAT MD800 - Using Inoloader Software

73
INOVANCE TECHNOLOGY EUROPE GmbH
MD800 EtherCAT Starting Guide_EN_v1.1_20211109.docx
9.2.1 USING INOLOADER SOFTWARE
To update the firmware with the InoLoader software it is necessary a USB-C cable, and a computer to run the
software.
Connect the USB-C cable to the laptop and the MD800 and follow the below procedure:
Start the InoLoader software and select the USB interface
as the communication port.
Set the Station number:
• Rectifier = 16
• Axis 1 = 1
• Axis 2 = 2
• ….
• Axis 8 = 8
• Upper option module = 14
• Lower option module = 15
Select the firmware file and click on the download button
to download it to the device.