Inovance EtherCAT MD800 - MD800 Device Description; Keypad and Operation Panel

54
INOVANCE TECHNOLOGY EUROPE GmbH
MD800 EtherCAT Starting Guide_EN_v1.1_20211109.docx
8 MD800 BRIEF DESCRIPTION
8.1 KEYPAD
The LED operation panel can display operating status, parameter settings, fault information, etc. The below
image shows the operation panel distribution:
Key description:
Button
Name
Function
Programming key
Return to the previous screen;
Enter the first level menu.
Enter
Go to the next screen;
Confirmation of mode, parameter and set value.
Multi-axis switch
key
To switch between multiple axes, rectifier is selected
by default.
Increment key
Change (increase) the parameter number and set
value.
Decrement key
Change (decrease) the parameter number and set
value.
Shift key
Shift left to select display parameters.
The digits that need to be changed when setting
parameter numbers and values are shifted to the left.
Multi-function
selection key
According to the set value of F7-01, switch between
the selected functions.