Inovance EtherCAT MD800 - MD800 Firmware Update Procedures

72
INOVANCE TECHNOLOGY EUROPE GmbH
MD800 EtherCAT Starting Guide_EN_v1.1_20211109.docx
9.2 MD800 FIRMWARE UPDATE
In some cases it is necessary to update the firmware of the rectifier, the inverters or the optional
communication modules. This section explains the procedure and the different methods to carry out this task.
The following table shows the parameters that indicate the firmware version of each module:
Parameter
Parameter description
Rectifier
F0-02
Rectifier software version
FD-91
Optional communication card firmware version
Inverter
F7-10
Performance software version
F7-11
Function software version