Inovance EtherCAT MD800 - Related Parameters

56
INOVANCE TECHNOLOGY EUROPE GmbH
MD800 EtherCAT Starting Guide_EN_v1.1_20211109.docx
Alert
Alarm status
Steady on: The device is
malfunctioning
Flashing: The device has an alarm
Run
Operating status
_
Stop
Stop status
_
• Data display area
There are a total of 5 LED data displays on the operation panel, which can display the set frequency,
output frequency, various monitoring data, and alarm codes.
• Unit display area
Unit
Description
kWh
Energy unit
r/min
Speed unit
Hz
Frequency unit
A
Current unit
V
Voltage unit
℃
Temperature unit
%
Percentage
8.3.1 RELATED PARAMETERS
Parameter
Parameter name
Default
Value
Setting Range
Description
F7-01
MF.K key function
selection
0
0: MF.K is invalid
1: Switch between
terminal command
channel or
communication
command
2: Forward and
reverse switching
3: Forward jog
4: Reverse jog
The MF.K key on the operation
panel is a multi-function key, and
the MF.K key is set by this
parameter
Function:
0: MF.K is invalid
This key has no function.
1: Switch between terminal
command channel or
communication command
F0-02 is set to 0 (operation panel),
there is no effect after pressing
the MF.K key
F0-02 Set to 1 (terminal), through
the MF.K key can be realized
between the terminal and the
operation panel
Switch; F0-02 is set to 2
(communication), through the
MF.K key can realize the
communication and