Inovance MD500T75G - Page 276

6SHFLÀFDWLRQV0'8VHU0DQ X D O 
- 276 -
Item Description
RUN Command source Allows different methods of switching between command sources:
ƕ Operating panel control
ƕ Terminal control
ƕ Communication control
Main frequency reference
setting channel
Supports up to 10 frequency sources and allows different
methods of switching between frequency source settings:
ƕ Digital setting
ƕ Analog voltage reference
ƕ Analog current reference
ƕ Pulse reference
ƕ Communication reference
Auxiliary frequency reference
setting channel
6XSSRUWVXSWRDX[LOLDU\IUHTXHQF\VRXUFHVDQGDOORZVÀQH
tuning of the auxiliary frequency and frequency superposition.
Input terminals Standard:
ƕ Five digital input (DI) terminals, one of which
supports up to 100 kHz high-speed pulse inputs.
ƕ Two analog input (AI) terminals, one of which
supports only 0 to10 V input, and the other supports
0 to 10 V and 4 to 20 mA current input.
Expanded capacity:
ƕ Five digital input (DI) terminals.
ƕ One AI terminal that supports –10 to 10 V voltage input
DQG3737PRWRUWHPSHUDWXUHVHQVRULQSXWV
Output terminals Standard
ƕ Single high-speed pulse output terminal (open-collector) for a
square-wave signal output in the frequency range 0 to 100 kHz
ƕ Single digital output (DO) terminal
ƕ Single relay output terminal
ƕ Single analog output (AO) terminal that supports
either a current output in the range 0 to 20 mA
or a voltage output in the range 0 to 10 V.
Expanded capacity:
ƕ Single extra DO terminal
ƕ Single extra relay output terminal
ƕ Single extra AO terminal that supports either a current output in
the range 0 to 20 mA or a voltage output in the range 0 to 10 V.
efesotomasyon.com