Inovance MD500T75G - Emc; CE Mark; CE Low Voltage Directive Compliance

13. EMC MD500 User Manual
- 302 -
13 EMC
13.1 CE Mark
The CE mark indicates compliance with European safety and environmental regulations. It is required for engaging in business
and commerce in Europe.
European standards include the Machinery Directive for machine manufacturers, the Low Voltage Directive for electronics
manufacturers, and the EMC guidelines for controlling noise.
This drive is marked with the CE mark based on the following EMC guidelines and the Low Voltage Directive.
ƕ /RZ9ROWDJH'LUHFWLYH(&
ƕ (0&*XLGHOLQHV(&
0DFKLQHVDQGGHYLFHVXVHGLQFRPELQDWLRQZLWKWKLVGULYHPXVWDOVREH&(FHUWLÀHGDQGPDUNHG7KHLQWHJUDWRUZKRLQWHJUDWHVWKH
drive with the CE mark in into other devices has the responsibility of ensuring compliance with CE standards and verifying that
conditions meet European standards.
13.2 CE Low Voltage Directive Compliance
This drive has been tested according to IEC 61800-5-1: 2007, and it complies with the Low Voltage Directive completely.
To enable machines and devices integrating this drive to comply with the Low Voltage Directive, be sure to meet the following
conditions:
Ƶ
Mounting Location
Mount the AC drive in places with pollution not higher than severity 2 and overvoltage category 3 in accordance with IEC60664.
efesotomasyon.com