Inovance MD500T75G - Overall Arrangement of Function Parameters

MD500 User Manual 4. Operations
- 65 -
4.3 Overall Arrangement of Function Parameters
The MD500 includes functions in group F, and new function groups A and U.
Function Code Group Description Standard Function Parameters
F0 to FP Standard function code group Standard function parameters
A0 to AC Advanced function code group $,$2FRUUHFWLRQ
U0 to U3 Running state function code group Display of basic parameters
Ƶ
Selection of Function Parameter Group
Figure 4-4 Selection of function parameter group
Level I menu
(Function code group)
PRG
...
...
When FP-02 = 1x
When FP-02 = x1
When FP-02 = 0x (ten's digit is 0),
parameters in group A are invisible.
State parameter
(default screen)
When FP-02 = x0 (unit's digit is 0),
parameters in group U are invisible.
Press to cycle through the function
code groups in positive sequence.
Press to cycle through the function
code groups in reverse sequency.
Ƶ
Selection of Displaying A and U Groups
The value you set for function parameter FP-02 determines whether the operating panel displays groups U and A.
Value of FP-02 Group A Group U
00 Not displayed Not displayed
01 Not displayed Displayed
10 Displayed Not displayed
11 (default) Displayed Displayed
efesotomasyon.com