Inovance MD800 Series - Page 28

Product Information
‑27‑
Components of the Filter Unit
Figure 1‑6 Components of the filter unit
Table 1–15 Description of the components of filter unit
No. Component Name Description
1
R/L1, S, T/L2 input terminals Used for power input.
2
Input grounding screw Used for input grounding.
3
Nameplate Used to display the product information.
4
R'/L1', S', T'/L2' output terminals Used to connect the power supply unit.
5
Output M4 grounding screw Used for output grounding.
6
Optional EMC screw
Used for EMC grounding (optional).