Inovance MD800 Series - 3.2.3 Wiring with EMC Shielded Brackets (Optional)

Product Information
‑26‑
Figure 1‑5 Components of the drive unit (dual‑axis)
Table 1–14 Description of the components of drive unit (dual‑axis)
No. Component Name
Description
1
STO terminal (optional)
Used as the optional STO terminal.
2
Product series Used to display the product series.
3
Power, voltage class, QR code,
serial number
Used to display the power, voltage class, QR
code, and serial number of the product.
4
Indicator of output axis 1 Used as the indicator of output terminal 1.
5
Output terminal of U1/V1/W1 axis
1
Used as output terminal 1 of the AC drive to
connect the three‑phase motor.
6
Indicator of output axis 2 Used as the indicator of output terminal 2.
7
Output terminal of U2/V2/W2 axis
2
Used as output terminal 2 of the AC drive to
connect the three‑phase motor.
8
2‑M4 screw grounding terminal Two grounding (PE) terminals used for
protective grounding.
9
Nameplate Used to display the product information.
10
Cooling fan Used for heat dissipation.