Inovance MD800 Series - Page 26

Product Information
‑25‑
Components of the Drive Unit
Figure 1‑4 Components of the drive unit (single‑axis)
Table 1–13 Description of the components of drive unit (single‑axis)
No. Component Name
Description
1
STO terminal (optional)
Used as the optional STO terminal.
2
Product model Used to display the product series.
3
Power, voltage class, QR code,
serial number
Used to display the power, voltage class, QR
code, and serial number of the product.
4
Indicators Used as indicators of output terminals.
5
U/V/W output terminals Used to connect the three‑phase motor.
6
2‑M4 screw grounding terminal
Two grounding (PE) terminals used for
protective grounding.
7
Nameplate Used to display the product information.
8
Cooling fan Cooling fan