Integra DTM-5.9 User Manual

32
Zone 2
In addition to your main listening room, you can also enjoy playback in the other room, or as we call Zone 2. And, you
can select a different source for each room.
This setup allows 2-channel playback (with the speaker
set A and B) in your main listening room and 2-channel
stereo playback in Zone 2, with a different source in each
room.
Hookup
• Use an RCA audio cable to connect the receiver’s
Zone 2 PRE OUT L/R jacks to an analog audio input
on your Zone 2 amp.
• Connect your Zone 2 speakers to the speaker terminals
on your Zone 2 amp.
• If your Zone 2 amp has a video input connector, use a
RCA video cable to connect the receiver’s Zone 2
VIDEO OUT jack to a video input on your Zone 2
amp.
Notes:
• The Zone 2 volume must be set on the Zone 2 amp.
• If you’re using a power amp with no volume control in
Zone 2, you must set the Zone 2 Out setting to
Variable (see page 33).
Connecting Zone 2
Receiver
R
L
IN
VIDEO IN
Zone 2
Receiver/
integrated amp
Main room

Integra DTM-5.9 Specifications

General

Brand	Integra
Model	DTM-5.9
Category	Stereo Receiver
Language	English