Integra DTM-5.9 User Manual

7
Getting to Know the Receiver
For detailed information, see the pages in parentheses.
A
On/Standby button (21)
Sets the receiver to On or Standby.
B
Speakers A and B switches (22)
Turn speaker sets A and B on or off.
C
Standby indicator (21)
Lights up when the receiver is on Standby and
flashes while a signal is being received from the
remote controller.
D
Zone 2 Level, Tone, [ ▲
] / [ ▼
] buttons (35)
The Level button and [ ▲ ]/[ ▼ ] buttons are used
when adjusting the volume level of Zone 2.
The Tone button and [ ▲ ]/[ ▼ ] buttons are used when
adjusting the Bass/Treble level and balance of Zone 2.
E
Zone 2/Off buttons (34)
The Zone 2 button is used when setting Zone 2.
The OFF button is used to turn off Zone 2.
F
Remote-control sensor (11)
Receives control signals from the remote controller.
G
Display button
Displays various information about the currently
selected input source.
H
Direct button (24)
Outputs the original sound source without applying
any effect.
I
Tuning Up/Down buttons (27)
Used for radio tuning.
J
Character button (29)
Used to label the FM or AM station preset number.
K
Number buttons (28)
Used to select a station by entering the frequency
directly or to enter characters to label the station
preset number.
L Enter button
Used to select satellite radio stations.
M Direct Tuning button (28)
When you know the frequency for the station you
want to listen to, you can select the station by
entering the frequency directly using this button and
number buttons.
N Master Volume control (22)
Sets the volume of the receiver.
O Balance control (24)
This control is for adjusting the sound level balance
between the left and right channel for speakers and
headphones.
P Treble control (24)
This control is for adjusting the level of treble
sounds.
Q Bass control (24)
This control is for adjusting the level of bass
sounds.
R Tuning mode button (27, 28)
Selects the Auto or Manual tuning mode for AM
and FM radio.
S Memory button (28)
Used when storing or deleting radio presets.
T Input selector buttons (22, 25)
Used to select the input sources.
U Zone 2 indicator (34)
Flashes when Zone 2 is being set. Light up when
Zone 2 is on.
V Phones jack (23)
This 1/4-inch phone jack is for connecting a
standard pair of stereo headphones for private
listening.
Front Panel
19K ML N23 567 8 J4
TV OU RPQS

Integra DTM-5.9 Specifications

General

Brand	Integra
Model	DTM-5.9
Category	Stereo Receiver
Language	English