Integra DTM-6 User Manual

38
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup |Others
BD/DVD Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "BD/DVD" is selected as input for main room.
" Zone2 (default value)": Output when "BD/DVD" is selected as
input for ZONE 2.
"M/Z2": Output when "BD/DVD" is selected as input for main
room or ZONE 2.
CBL/SAT Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "CBL/SAT" is selected as input for main room.
" Zone2 (default value)": Output when "CBL/SAT" is selected as
input for ZONE 2.
"M/Z2": Output when "CBL/SAT" is selected as input for main
room or ZONE 2.
GAME Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "GAME" is selected as input for main room.
"
Zone2 (default value)": Output when "GAME" is selected as
input for ZONE 2.
"M/Z2": Output when "GAME" is selected as input for main room
or ZONE 2.
PC Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "PC" is selected as input for main room.
"
Zone2 (default value)": Output when "PC" is selected as input
for ZONE 2.
"M/Z2": Output when "PC" is selected as input for main room or
ZONE 2.
CD Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "CD" is selected as input for main room.
"
Zone2 (default value)": Output when "CD" is selected as input
for ZONE 2.
"M/Z2": Output when "CD" is selected as input for main room or
ZONE 2.
TV/TAPE Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "TV/TAPE" is selected as input for main room.
" Zone2 (default value)": Output when "TV/TAPE" is selected as
input for ZONE 2.
"M/Z2": Output when "TV/TAPE" is selected as input for main
room or ZONE 2.
PHONO Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "PHONO" is selected as input for main room.
" Zone2 (default value)": Output when "PHONO" is selected as
input for ZONE 2.
"M/Z2": Output when "PHONO" is selected as input for main
room or ZONE 2.
TUNER Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "TUNER" is selected as input for main room.
" Zone2 (default value)": Output when "TUNER" is selected as
input for ZONE 2.
"M/Z2": Output when "TUNER" is selected as input for main
room or ZONE 2.
NET Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "NET" is selected as input for main room.
"
Zone2 (default value)": Output when "NET" is selected as input
for ZONE 2.
"M/Z2": Output when "NET" is selected as input for main room or ZONE 2.
BLUETOOTH Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "BLUETOOTH" is selected as input for
main room.
"Z2 (default value)": Output when "BLUETOOTH" is selected as
input for ZONE 2.
"M/Z2": Output when "BLUETOOTH" is selected as input for
main room or ZONE 2.
SN29403237_DTM-6_En_1707XX.book 38 ページ ２０１７年７月２７日 木曜日 午後１時３９分

Integra DTM-6 Specifications

General

Brand	Integra
Model	DTM-6
Category	Receiver
Language	English