11
Front Panel
Off
Input Bass Treble Balance
DisplaySpeaker A Speaker B
Phones
Zone 2
On/Standby
Setup Enter Return
Memory Tuning Mode
USB
Master Volume
Hybrid
Standby
Dimmer
L R
- +- +
Menu
Play/Pouse
Preset
Clear
Tuning Preset
OP Q R
S T U
V
O Hybrid Standby indicator: Lights up when
any of the following functions is working or
enabled in standby state of this unit. When this
indicator is lighting, the power consumption in
standby state increases, however, the increase
in power consumption is minimized by entering
the HYBRID STANDBY mode where only the
essential circuits operate.
– HDMI CEC ( →p78)
– HDMI Standby Through ( →p78)
– Network Standby ( →p79)
– Bluetooth Wakeup ( →p79)
P Remote control sensor: Receives signals from
the remote controller.
• The reception range of the remote controller
is within a distance of approx. 16´/5 m, and
an angle of 20° in vertical direction and 30° to
right and left.
Q Display ( →p12)
R Cursor buttons ( / / / ) and Enter
button: Select an item with the cursors, and
Use them to tune to stations when using TUNER.
( →p46)
S Speaker A/B buttons: Select the terminals to
output audio from between SPEAKERS A/B.
T Display button: Switches the information on
the display. You can display information such as
the input source, volume, and input format when
pressed repeatedly during play.
U Setup button: You can display advanced setting
items on the TV and the display to have a more
enjoyable experience with this unit. ( →p73)
V Return button: Returns the display to the
previous state while setting.
To Next Page
Loading...
