Integra DTM-7.4 - Part Names; Front Panel

10
Front Panel
Off
Input Bass Treble Balance
DisplaySpeaker A Speaker B
Phones
Zone 2
On/Standby
Setup Enter Return
Memory Tuning Mode
USB
Master Volume
Hybrid
Standby
Dimmer
L R
- +- +
Menu
Play/Pouse
Preset
Clear
Tuning Preset
A B
C D E F G
8 9 J K
L M N
A On/Standby button
B Master Volume dial
C Phones jack: Connect headphones with a

D Dimmer button: Switches the brightness of the
󰀨
completely.
E Zone 2 button: Controls the multi-zone function.
( →p61)
F O󰀨 button󰀨
G Input dial: Switches the input to be played.
H Bass dial: Adjusts the bass.
I Treble dial: Adjusts the treble.
J Balance dial: Adjusts the balance of the sounds
output from the left and right speakers.
K Menu button: Used to display the menu.
Memory button (North American models only):
Used to register AM/FM radio stations.
L Play/Pause button: Used for play operations
when playing Music Server or USB.
Tuning Mode button (North American models
only) : Switches tuning to an AM/FM station
between automatic tuning and manual tuning.
M Skip buttons
: Used for play operations
when playing Music Server or USB.
Preset buttons
(North American
models only): Used to tune to registered AM/FM
stations.
N USB port: Connect a USB storage device to play

to USB devices with a USB cable.
Part Names