Why Integra DTR-5 has buzzing noise on AM?
If you hear a buzzing noise on AM with your Integra Receiver, especially at night or with weak stations, the noise may be coming from electrical apparatus like a fluorescent lamp. Try moving the AM loop antenna to a different position. You can also set up an outdoor AM antenna.
How to eliminate high-pitched noise on Integra Receiver?
If you are getting a high-pitched or buzzing noise on AM with your Integra Receiver, the noise may be coming from your TV set. Place the AM loop antenna as far away from the TV as possible. Also, move the unit away from the TV set.
Why Integra DTR-5 has crackling noise on AM, FM?
If you are experiencing crackling noise on AM or FM with your Integra Receiver, the noise may be caused by turning a fluorescent lamp on and off. Move the antenna as far as possible from the fluorescent lamp. If the noise is from automobile ignition, install an FM outdoor antenna as far as possible from the road.
What to do if the sound of the playback source is not heard on Integra DTR-5 Receiver?
If the sound of the playback source is not heard on your Integra Receiver, make sure the input selector is set to the correct playback source.
Why does my Integra DTR-5 Receiver not recall any stations?
If no station is recalled on your Integra Receiver, the memory contents may have been lost because the power cord was unplugged or the POWER switch was turned off for an extended period. Store all stations again.
Steps to turn the unit on and off using the main unit or remote.
Configuring speaker presence and size settings.
Adjusting speaker distance from the listening position.
Using test tone to adjust speaker levels for optimal sound.
Choosing between digital and analog audio inputs for sources.
Adjusting individual speaker levels for multi-channel sources.
Explains listening modes, including digital formats and custom options.
General overview and controlling the DTR-5 unit.
How to teach the remote to control other devices.
Removing programmed codes from individual buttons or modes.
Resetting the remote to factory defaults by erasing all programmed data.
General| HDMI Outputs | 1 |
|---|---|
| Component Video Outputs | 1 |
| THD | 0.08% |
| Frequency Response | 10Hz - 100kHz |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200mV |
| Video Inputs | 4 (composite) |
| Audio Inputs | 4 (analog) |
To Next Page
