Introduction
Design Guide 9
Document Title
Document
Number /Source
American National Standard for Methods of Measurement of Radio-Noise
Emissions from Low-Voltage Electrical and Electronic Equipment in the Range
of 9 kHz to 40 GHz for EMI testing
ANSI C63.4
UL 60950-1 First Edition –CAN/CSA-C22.2 No. 60950-1-03
First Edition,
IEC 60950-1: 2001 + Amendments and National Deviations,
EN 60950-1: 2001 + Amendment A11:
EU Low Voltage Directive (73/23/EEC) (CE Compliance)
GB-4943 (China)
CNS 14336: (Taiwan BSMI)
FCC*, Class B, Part 15 (Radiated and Conducted Emissions)
CISPR* 22 / EN55022, 5th Edition (Radiated and Conducted Emissions)
EN55024 (ITE Specific Immunity)
EN 61000-4-2 – Electrostatic Discharge
EN 61000-4-3– Radiated RFI Immunity
EN 61000-4-4– Electrical Fast Transients
EN 61000-4-5 – Electrical Surge
EN 61000-4-6 – RF Conducted
EN 61000-4-8 – Power Frequency Magnetic Fields
EN 61000-4-11 – Voltage Dips, Short Interrupts and Fluctuations
EN61000-3-2 (Harmonics)
EN61000-3-3 (Voltage Flicker)
EU EMC Directive ((8/9/336/EEC) (CE Compliance))
IEC 62368
1.3 Terminology
Table 1-1 defines the acronyms, conventions, and terminology that are used
throughout the design guide.
Table 1-1: Conventions and Terminology
Acronym/Convention
/Terminology
Description
ASM
Alternative Sleep Mode, ASM replaces the traditional Sleep Mode
(ACPI S3) with a new sleep mode. An example of ASM is with
Microsoft* Modern Standby* or Lucid Sleep with Google* Chrome*
AWG American Wire Gauge
BA
Declared sound power, LwAd. The declared sound power level shall
be measured according to ISO* 7779 for the power supply and
reported according to ISO 9296.
CFM Cubic Feet per Minute (airflow).