Mechanical
613768 51
Company
Motherboard Connector
Part Number
Cable Connector
Part Number
Amphenol* 10157976-1022BPLF 10158000-101LF
Lotes* GAP-APOW0106-P001A01 ABA-WAF-903-P01
Foxconn* HMBA050-K3FF2-4H
Wieson* AC2211-0009-003-HH AB9001-0009-005-HH
The mating pilers are unique to this design, refer to figure below. Note connector color
can be changed work with connector companies to see what they provide.
Motherboard connector color is recommended to be white to show that power into the
board is different color than power going out of the board (3 mm SATA Power
Connector), which is recommended to be black.
This connector may be provided by other connector companies beyond what is listed
above. Contact the preferred connector provider for details. Below is the key for this
connector, from motherboard connector view. 18 AWG is recommended for all wires.
Connector needs to support 8 amps per pin.
Figure 5-2: 4.2 mm Power Header 10 pin Main Power - Pin Locations
To Next Page
Loading...
Need help?
General
