SFX12V Specific Guidelines 4.0
613768 87
14.3 Top Fan Mount Package – Physical Dimensions
(Required)
The power supply shall be enclosed and meet the physical outline shown in Figure
14-3.
14.4 Fan Requirements (Required)
The fan will draw air from the computer system cavity pressurizing the power supply
enclosure. The power supply enclosure shall exhaust the air through a grill located on
the rear panel. Refer to Moving the fan to the computer system cavity helps to limit
the acoustic noise of the unit.
The fan will be 80 mm.
To prevent damage to the fan during shipment and handling, the power supply
designer should consider recessing the fan mounting, as shown in Figure 14-5.
To Next Page
Loading...
Need help?
General
