TFX12V Specific Guidelines 3.0
613768 97
Figure 15-3: TFX12V Power Supply Mounting Slot Detail
15.2 Mounting Options (Recommended)
The TFX12V mechanical design provides two options for mounting in a system chassis.
The unit can be mounted using one of the mounting holes on the front end (non-
vented end) or a chassis feature can be designed to engage the slot provided in the
bottom of the supply. To accommodate different system chassis layouts, the TFX12V
power supply is also designed to mount in two orientations (fan left and fan right) as
shown in Figure 15-4
. A mounting hole and slot should be provided for each
orientation as shown in Figure 15-2. Details of a suggested geometry for the mounting
slot are shown in Figure 15-3.
To Next Page
Loading...
Need help?
General
