Safety
613768 77
The power supply must meet the RoHS requirements for the European Union, Peoples
Republic of China and other countries which have adopted the RoHS requirements for
banned materials.
9.3 Proscribed Materials (Required)
The following materials must not be used during design and/or manufacturing of this
product:
• Cadmium should not be used in painting or plating (Required).
• Quaternary salt and PCB electrolytic capacitors shall not be used (Required).
• CFC's or HFC's shall not be used in the design or manufacturing process (Required).
• Mercury shall not be used (Required).
• Some geographies require lead free or RoHS compliant power supplies (Required).
9.4 Catastrophic Failure Protection (Recommended)
Should a component failure occur, the power supply should not exhibit any of the
following:
• Flame
• Excessive smoke
• Charred PCB
• Fused PCB conductor
• Startling noise
• Emission of molten material
• Earth ground fault (short circuit to ground or chassis enclosure)
§§
To Next Page
Loading...
Need help?
General
