Intel Content

Getting Started for Admin
Content Access Point
User Manual August 2015
12
2.7 Log on as admin for the first time
Wirelessly connect to the device using its default SSID. The default SSID is WRTD-303N_xxxxxx, where
“xxxxxx” is the last six digits of the Wi-Fi MAC address (WFM), which is printed on the bottom of the
device. (See Figure 2 item 6.) For example, for a device with a WFM of F835DD85457A, the wireless SSID
is WRTD-303N_85457A. (See Figure 7.)
Launch a browser and go to http://my.admin (or http://192.168.88.1:8080).
Enter username admin and password admin.
Change the admin default password when prompted.
Figure 7: Admin - Wirelessly connect to the Content Access Point