Intel Content User Manual

Getting Started for Admin
Content Access Point
User Manual August 2015
14
2.9 Preload content
TIP! See Section 5 (Content Management (Admin Guide)) for advanced methods of uploading content.
To upload content, do the following:
Create a package containing the content to upload:
a. Zip the content into a file.
Note: Do not use Windows* built-in compression tool.
b. Do not include subfolders.
c. Do not encrypt or password-protect the zipped file.
d. Total size must not exceed 2 GB for upload over WiFi.
Upload:
a. Open browser and go to http://my.content.
b. Click Login.
c. Log in with the administrator’s username and password.
d. Click Upload Package. (See Figure 9.)
e. Click Choose Files and select one or more zipped packages.
f. Click Upload.
Figure 9: Admin - Upload package

Intel Content Specifications

General

Brand	Intel
Model	Content
Category	Wireless Access Point
Language	English

Summary

2 Getting Started for Admin

2.3 Get to know the device

2.6 Setup

2.7 Log on as admin for the first time

2.8 Run the setup wizard

2.9 Preload content

4 Content and Lesson Management (Teacher Guide)

4.1 Log on as a teacher

Steps for teachers to access the management interface.

4.2 Upload and manage content in the library

Process for uploading and organizing content files.

4.2.1 Create and manage categories

4.2.2 Upload content

4.2.5 Hide and show content and library from students

4.2.6 Delete content

4.3.1 Create a lesson name

4.3.2 Add content to a lesson

4.3.4 Remove content from a lesson

4.3.7 Delete a lesson

4.5 Device settings

5 Content Management (Admin Guide)

5.1 Create preloaded content package

Instructions for creating a zip file for preloaded content.

5.2 Log on as an administrator

Steps for administrators to log into the system.

5.3 Add preloaded content package

5.4 Delete preloaded content

5.5 Delete teacher content

6 Access Point Management (Admin Guide)

6.1 Log on as admin

Steps to log in as the administrator.

6.2 Setup wizard

Using the wizard for initial device configuration.

6.4 General settings

6.6 Wireless settings

6.6.1 Wireless access point

Settings for the Wi-Fi access point, including SSID and security.

6.6.2 Access control list

6.7 LAN settings

6.7.1 IP address

6.7.2 DHCP Server

6.8 WAN settings

6.8.1 Ethernet-based WAN

Configuring the wired internet connection.

6.8.2 Cellular-based WAN

6.9 Firewall settings

6.10 Account settings

6.10.1 Admin account

6.10.2 Teacher account

6.11 Device management

6.11.1 Update firmware

Steps to update the device's firmware.

6.11.2 Backup and restore the configuration settings

6.11.3 Reboot the device

6.11.4 Reset to factory defaults

7 Troubleshooting and Support

No Internet access through Ethernet connection

No Internet access through 3G/4G/LTE connection

System unresponsive and admin cannot log on