13
Chapter 2
Setting Up the Gateway on a Network
Do not attempt to connect multiple computers to form a
network until you have configured the gateway to work
with a single computer, as described in the Installation
Guide.
In this chapter, you’ll find information on the following:
■ Planning your network
■ Connecting the gateway to an Ethernet hub or switch
■ Configuring the gateway as an access point
■ Installing wireless adapters on other PCs
■ Using Windows* XP Client Configuration Manager
■ Configuring the adapter
A word about
networks
This manual assumes that you are familiar with common
network terms and concepts and that you understand
how a basic network is set up. This manual is not meant
to be a comprehensive explanation of networking.
Note This chapter explains how to set up your Intel
Wireless Gateway II as a wireless access point on an
existing network.
To set up the gateway for a new network, see the
printed Installation Guide, or look for the Installation
Guide PDF file on the CD. Double-click My Computer
> CD-ROM drive > DOCS > English > Gateway >
1210 > install_guide_gw1210.pdf.
user_guide_rg1210.book Page 13 Monday, April 22, 2002 2:20 PM
To Next Page
Loading...
Need help?
General
