Chapter 2 – Setting Up the Gateway on a Network
16
Configuring the gateway as an access point
Configure the gateway as an access point if you are
adding wireless connectivity to an existing wired
(Ethernet) network.
In this step, you will use the installation CD to configure
your PC-to-gateway connection.
To manually open the gateway configuration software,
open your browser and type 192.168.0.10 in the address
field. The configuration screens are located inside the
gateway, not on the Internet.
1 Insert the CD and wait for the window to appear.
If the window does not appear, double-click the
program icon for Autorun.exe on the CD.
Note If you are connecting the gateway directly to the
modem that accesses the Internet, follow the
connection instructions in the Installation Guide and
use Gateway Mode.
user_guide_rg1210.book Page 16 Monday, April 22, 2002 2:20 PM
To Next Page
Loading...
Need help?
General
