Chapter 4 – Using the Advanced Feature Set
46
Step-by-step 1 From the main Wireless Gateway screen, click
Advanced Settings.
2 In the left column under Advanced settings, click
DHCP Server Settings.
The following appears.
3 Select Enable DHCP Server Functions if you want
to enable the DHCP server. Otherwise, clear this
check box and click Apply.
4 If you enabled the server, review the default settings
(if any). Type any new IP addresses in the reserved
boxes for local network facilities such as e-mail, the
Web, or an FTP server.
5 Click Apply.
Your changes are sent to the other adapters in the
network immediately.
Assigning virtual server settings
The Virtual Server settings (sometimes called port
mapping) allow you to specify virtual addresses for
special services such as telnet, HTTP, FTP, IRC, SMTP,
POP3, and others.
Your Intel Wireless Gateway II has an integrated Network
Address Translation (NAT) firewall that prevents any
user_guide_rg1210.book Page 46 Monday, April 22, 2002 2:20 PM
To Next Page
Loading...
Need help?
General
