Chapter 1 – Overview
5
Non-Windows clients can access the Internet through the
Intel Wireless Gateway II, but not configure the gateway.
These PCs must meet the following system
requirements:
• Macintosh* OS 9.2 or later, with Internet Explorer 5.x
or higher
• Linux* system, with Netscape 4.75 or higher
All PCs and laptops connected to the gateway must
have:
• For a wireless connection: a Wi-Fi* approved IEEE
802.11b-compatible adapter (we recommend the
AnyPoint
®
Wireless II or Intel PRO/Wireless LAN
network adapters).
• For a wired network: IEEE 802.3 10/100 Ethernet
network adapter, or a hub or switch.
Service
requirements
To use the Intel Wireless Gateway II to manage your
broadband Internet access, you need:
• An Internet access account from your local telephone
company or an Internet Service Provider (ISP).
• A broadband modem (cable or DSL) with an Ethernet
connection.
A look at the gateway hardware
Front panel The front panel of the Intel Wireless Gateway II has a
series of nine lights that provide information about the
user_guide_rg1210.book Page 5 Monday, April 22, 2002 2:20 PM
To Next Page
Loading...
Need help?
General
