Chapter 3 – Changing the Gateway Settings
24
Opening the gateway configuration software
The configuration software for the gateway resides inside
the gateway, not on the Internet.
Step-by-step 1 Type the following Internet address into your Web
browser: http://192.168.0.10.
or
Go to Start > Programs > Intel AnyPoint > Intel
Wireless Gateway 1210 > Network Setup, and then
click Yes when asked if you want to change the
gateway settings.
The following appears.
2 Enter your user name and password and then click
OK.
The following appears.
user_guide_rg1210.book Page 24 Monday, April 22, 2002 2:20 PM
To Next Page
Loading...
