Chapter 2 – Setting Up the Gateway on a Network
22
• Key number
• Value of the key
Configuring the adapter
Step-by-step 1 On your Windows XP PC, right-click the wireless
adapter icon in the system tray.
2 Choose View available wireless networks.
3 When the Connect to Wireless Network screen
appears, select the access point in the Available
Networks List that displays your Intel Wireless
Gateway. Do not enter a network key at this time.
4 Click Advanced.
YouseeadialogboxshowinganAvailable
Networks list and a Preferred Networks list.
5 From the Available Networks List, select the Gateway
and then click the Configure button.
A Wireless Network Properties screen appears.
6 Check Data encryption (WEP enabled). Also, clear
the check box The key is provided for me
automatically.
7 Using the setting from your Install Information
Worksheet, enter the value for the key.
Make sure the key format is in hexadecimal
characters (0-9 and A-F) and the key length is 10
digits (for 40-bit) or 26 digits (for 104-bit).
See Manually enter encryption keys on page 29 for
examples.
8 Click OK.
Clicking OK from the Wireless Network Properties
screen takes you back to the Wireless Network
Connection Properties, where you can click OK again
to exit and save changes.
user_guide_rg1210.book Page 22 Monday, April 22, 2002 2:20 PM
To Next Page
Loading...
Need help?
General
