Chapter 3 – Changing the Gateway Settings
32
Changing your device settings
Change device settings to specify one of two gateway
operating modes.
• Wireless Gateway Mode
– Set the gateway to this
mode if you are connecting the gateway directly to a
broadband modem. See Changing Wireless Gateway
Mode settings on page 33.
• Access Point Mode
– Set the gateway to this mode
if you are connecting the gateway to an existing
network. See Changing the access point setting on
page 35.
Step-by-step 1 From the main Wireless Gateway screen, click
Setup Wizard.
2 In the left column under the Setup Wizard, click
Device Settings.
The following appears.
user_guide_rg1210.book Page 32 Monday, April 22, 2002 2:20 PM
To Next Page
Loading...
Need help?
General
