Chapter 3 – Changing the Gateway Settings
27
Step-by-step 1 Open the Wireless Gateway screen, and then click
Setup Wizard.
2 From the Setup Wizard,clickNetwork Name.
The Network Name (SSID) box appears.
If you have already installed your gateway, the
default name appears in the box (Intel Gateway).
3 Enter a new Network Name.
Use any letters or numbers up to 32 characters (case
sensitive).
4 Click Save/Next to apply the change to the gateway.
Click Save/Next until you see the Save & Restart
button to activate and restart your gateway.
user_guide_rg1210.book Page 27 Monday, April 22, 2002 2:20 PM
To Next Page
Loading...
