Chapter 4 – Using the Advanced Feature Set
44
Dynamic
routing
1 From the main Wireless Gateway screen, click
Advanced Settings.
2 In the left column under Advanced Settings, click
Routing Information.
The following appears.
3 In the SEND field, select the same protocol you use
to transmit data to the network.
4 In the RECEIVE field, select the same protocol you
use to receive data from the network.
5 Click Apply.
The values are saved and stored in the configuration
software.
Static routing 1 From the main Wireless Gateway screen, click
Advanced Settings.
2 In the left column under Advanced Settings, click
Routing Information.
user_guide_rg1210.book Page 44 Monday, April 22, 2002 2:20 PM
To Next Page
Loading...
Need help?
General
