Intel S1200BTS User Manual

BIOS User Interface Intel® Server Board S1200BT TPS
Revision 1.0
Intel order number G13326-003
70
3. Current Configuration
Option Values: Single Channel
Dual Channel Symmetric
Intel
®
Flex
Help Text: <None>
Comments: Displays one of the following:
 Single Channel – DIMMs are operating in Single Channel mode. This is the
configuration when only one channel is populated with DIMMs.
 Dual Channel Symmetric – DIMMs are operating in Dual Channel
Symmetric mode. This is the configuration when both channels are identically
populated with DIMMs.
 Intel
®
Flex – DIMMs are configured according to Intel
®
Flex Memory
Technology, where part of the memory is in Dual Channel Symmetric mode
and part in Dual Channel Asymmetric mode. This is the configuration when
both channels are populated, but with unequal amounts of memory.
4. Current Memory Speed
Option Values: 1066
1333
Help Text: <None>
Comments: Displays the speed in MT/s at which the memory is currently running.
5. Memory Operating Speed Selection
Option Values: Auto
1066
1333
Help Text: Force specific Memory Operating Speed or use Auto setting.
Comments: Displays the state of each DIMM socket present on the board. Each
DIMM socket field reflects one of the following possible states:
6. DIMM_A1
7. DIMM_A2
8. DIMM_B1
9. DIMM_B2
Option Values: Installed
Not Installed
Failed
Disabled
Help Text: <None>

Intel S1200BTS Specifications

General

Chipset	Intel C204 Chipset
Form Factor	MicroATX
Processor Socket	LGA 1155
Number of Processors Supported	1
Number of Memory Slots	4
Processor Support	Intel Xeon E3-1200 series
Memory Support	DDR3 ECC UDIMM
Expansion Slots	1 PCI-E x16 Gen3, 1 PCI-E x4 Gen2, 1 PCI-E x1 Gen2, 1 PCI 32bit/33MHz
Storage	4 x SATA 3Gb/s, 2 x SATA 6Gb/s
Network Interface	Dual Gigabit Ethernet ports
Memory Speed	1333 MHz
RAID Supported	RAID 0, 1, 5, 10
USB Ports	4 rear