Server Board Overview Intel® Server Boards S3200SH/S3210SH TPS
Revision 1.3
4
• Video
• ServerEngines* Integrated BMC
• External 32MB (or greater) DDR2 533MHz memory
• VGA Video external connector
• Peripheral Interface (PCIe* and PCI)
− Two different PCIe* configurations on single board, dependent on board SKU
LX board SKU: One PCIe* x16 and one PCIe* x8 slot, connected to the
PCIe* ports of the MCH
LC board SKU: One PCIe* x16 and one PCIe* x8 slot, connected to the
PCIe* ports of the MCH; one PCIe* x8 slot, connected to PCIe* x4
interface of the ICH
L and V board SKUs: Two PCIe* x8 slots, one connected to the PCIe* x8
interface of the MCH and the other connected to the PCIe* x4 interface of
the ICH
• HDD Interface
− Six SATA II ports, 300MB per second
• USB
− Two USB 2.0 ports connected to the server rear panel
− Two USB 2.0 ports connected to headers on the server board
− One USB 2.0 port connected to an internal vertical connector
• LAN
− One Gigabit Ethernet device (Tabor, MAC + PHY) connect to PCI interfaces on
the ICH9R.
− One Gigabit Ethernet PHY (Nineveh) connected to ICH9R thru GLC/LCI
interface. (not in V board SKU)
− Two 10/100/1000 Base-TX interfaces through RJ45 connectors with integrated
magnetics
− Link and speed LEDs on the RJ45 connector
• Power Supply
− SSI EEB Power Connectors
− On board Power generation
VRD 11 processor core voltage
1.2V regulator for FSB VTT
1.25V regulator for MCH core and I/O
1.05V regulator for ICH9R core
1.5V regulator for the ICH9R I/O
1.8V for DDR2 and 0.9V for DDR2 termination
3.3V SB voltage regulator
1.8V AUX, 1.2V AUX, and 0.9V AUX for Integrated BMC and its DDR2
memory
To Next Page
Loading...
