Intel® Server Boards S3200SH/S3210SH TPS System BIOS
Revision 1.3
72
Table 39. Setup Utility — Error Manager Screen Fields
Setup Item Options Help Text Comments
Displays System Errors
Information only. Displays errors that
occurred during this POST.
4.3.2.9 Exit Screen
The Exit screen allows the user to choose to save or discard the configuration changes made
on the other screens. It also provides a method to restore the server to the factory defaults or to
save or restore a set of user defined default values. If Restore Defaults is selected, the default
settings, noted in bold in the tables in this chapter, will be applied. If Restore User Default
Values is selected, the system is restored to the default values that the user saved earlier,
instead of being restored to the factory defaults.
Error Manager Exit
Save Changes and Exit
Discard Changes and Exit
Save Changes
Discard Changes
Load Default Values
Save as User Default Values
Load User Default Values
Figure 31. Setup Utility — Exit Screen Display
Table 40. Setup Utility — Exit Screen Fields
Setup Item Help Text Comments
Save Changes and Exit Exit BIOS Setup Utility after saving changes.
The system will reboot if required.
The [F10] key can also be used.
User is prompted for confirmation only
if any of the setup fields were
modified.
Discard Changes and
Exit
Exit BIOS Setup Utility without saving changes.
The [Esc] key can also be used.
User is prompted for confirmation only
if any of the setup fields were
modified.
Save Changes Save changes without exiting BIOS Setup
Utility.
Note: Saved changes may require a system
reboot before taking effect.
User is prompted for confirmation only
if any of the setup fields were
modified.
To Next Page
Loading...
