Intel® Server Boards S3200SH/S3210SH TPS System BIOS
Revision 1.3
54
Advanced
Memory Configuration
Total Memory <Total Physical Memory Installed in System>
Effective Memory <Total Effective Memory>
Current Configuration < Single Channel/Dual Channel >
Current Memory Speed <Speed that installed memory is running at.>
DIMM Information
DIMM_A1 Installed/Not Installed/Failed
DIMM_A2 Installed/Not Installed/Failed
DIMM_B1 Installed/Not Installed/Failed
DIMM_B2 Installed/Not Installed/Failed
Memory Correction ECC/Non-ECC
Figure 14. Setup Utility — Memory Configuration Screen Display
Table 23. Setup Utility — Memory Configuration Screen Fields
Setup Item Options Help Text Comments
Total Memory
Information only. The amount of memory
available in the system in the form of
installed DIMMs, in units of MB or GB.
Effective Memory
Information only. The amount of memory
available to the operating system in MB or
GB.
The Effective Memory is the difference
between Total Physical Memory and the
sum of all memory reserved for internal
usage. This difference includes the sum of
all DIMMs that failed Memory Test during
POST.
Current Configuration
Information only. Displays one of the
following:
• Dual Channel: System memory is
configured for optimal performance and
efficiency.
• Single Channel: System memory is
functioning in a special, reduced
efficiency mode.
To Next Page
Loading...
