Intel® Server Boards S3200SH/S3210SH TPS System BIOS
Revision 1.3
66
4.3.2.6 Boot Options Screen
The Boot Options screen displays any bootable media encountered during POST, and allows
the user to configure desired boot device.
To access this screen from the Main screen, select Boot Options.
Main
Advance
d
Security Server Management Boot Options Boot Manager
Boot Timeout
<0 - 65535>
Boot Option #1
<Available Boot devices>
Boot Option #2
<Available Boot devices>
Boot Option #x
<Available Boot devices>
Boot Option Retry
Enabled / Disabled
Hard Disk Order
CDROM Order
Floppy Order
Network Device Order
BEV Device Order
Figure 23. Setup Utility — Boot Options Screen Display
Table 32. Setup Utility — Boot Options Screen Fields
Setup Item Options Help Text Comments
Boot Timeout
0 - 65535
The number of seconds BIOS will
pause at the end of POST to allow the
user to press the [F2] key for entering
the BIOS Setup Utility.
Valid values are 0-65535. Zero is the
default. A value of 65535 will cause the
system to go to the Boot Manager
menu and wait for user input for every
system boot.
After entering the desired
timeout, press enter to register
that timeout value to the
system. These settings are in
seconds.
Boot Option #x Available boot
devices.
Set system boot order by selecting the
boot option for this position.
Boot Option Retry Enabled
Disabled
This will continually retry NON-EFI
based boot options without waiting for
user input.
To Next Page
Loading...
